![Matthias Funk](/img/20110428-CN-02-052_rdax_230x322s.jpg)
Matthias Funk
- Ph.D. Student
- Tel.: +49 721 608-24892
- Fax: +49 721 608-22347
- matthias funk ∂does-not-exist.kit edu
Karlsruhe Institute of Technology (KIT)
Institute for Applied Materials (IAM)
Campus North, Bldg. 696
Hermann-von-Helmholtz-Platz 1
76344 Eggenstein-Leopoldshafen
Germany
Matthias Funk
Junior Research Group of Dr. Christoph Eberl
Project description
The project is about the fatigue of small samples with nanoscaled microstructure at frequencies up to 50 Hz. For testing, a GABO Eplexor FT Rheometer is employed. The fourier transform of the amplitude-spectra tells us something about the non-linear fraction, which is responsible for teh damage progress in the sample. The measurement of the strain has to be very accurate with digital image correlation (DIC) and/or laser interferometry.
Education and Qualifications
since 08/2008
University of KarlsruhePh.D.-student
2003 / 2008
University of Erlangen-NurembergMaterials science
Topic of the diploma thesis "Martensiteformation in cold-worked austenitic steels and it's characterisation with nanoindentation, MFM and EBSD"
Graduation (04/2008): Dipl.-Ing. (materials scinece)
2002 / 2003
University of applied Science Nurembergdepartment of glass & ceramics
Employment and Work Experience
2010
University of California, Berkeley, USA
National Center of Electron Microscopy (NCEM), Berkeley Labs
In-situ fatigue testing of nanocrystalline Cu in the TEM
visiting scientist in the group of Prof. Andrew Minor
2007
Johns Hopkins University Whiting School of engineering, Baltimore, MD, USA
"Studienarbeit" in the department of mechanical engineering of Prof. K. Hemker
"Investigation of high temperature mechanical behavior of end-of-life cryomilled NiCrAlY bond coat" (paper)
2006
intership at MTU aero engines, Munich
Thermo-mechanical fatigue (TMF) of Thermal barrier coating (TBC) systems
2005/2006
"HiWi" University of Erlangen-Nuremberg
sample preparation of Mg- and Ni-alloys, light microscopy, microstructure characterisation
2005
Siemens, Forschungszentrum
Pt-welding of the wiring of experimental fuel cell set-up's
2004/2005
"HiWi" University of Erlangen-Nuremberg
sample preparation of thixo-Al and it's characterisation in LM and AFM
2003/2004
Siemens MED
quality control of potentiometer
2002/2003
"HiWi" FhG/University of Erlangen-Nuremberg
LabView-programmation