YIN Publications 2017


3D Laser Micro- and Nanoprinting: Challenges for Chemistry
Barner-Kowollik, C.; Bastmeyer, M.; Blasco, E.; Delaittre, G.; Müller, P.; Richter, B.; Wegener, M.
2017. Angewandte Chemie / International edition, 56 (50), 15828–15845. doi:10.1002/anie.201704695
PRIVACY-AVARE: An approach to manage and distribute privacy settings
Alpers, S.; Oberweis, A.; Pieper, M.; Betz, S.; Fritsch, A.; Schiefer, G.; Wagner, M.
2017. 2017 3rd IEEE International Conference on Computer and Communications (ICCC), Chengdu, CHN, December 13-16, 2017, 1460–1468, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CompComm.2017.8322784
Generating realistic scaled complex networks
Staudt, C. L.; Hamann, M.; Gutfraind, A.; Safro, I.; Meyerhenke, H.
2017. Applied Network Science, 2 (1), Article: 36. doi:10.1007/s41109-017-0054-z
Manganese silicate hollow spheres enclosed in reduced graphene oxide as anode for lithium-ion batteries
Ma, Y.; Ulissi, U.; Bresser, D.; Ma, Y.; Ji, Y.; Passerini, S.
2017. Electrochimica acta, 258, 535–543. doi:10.1016/j.electacta.2017.11.096
Phosphoric Acid Invasion in High Temperature PEM Fuel Cell Gas Diffusion Layers
Bevilacqua, N.; George, M. G.; Galbiati, S.; Bazylak, A.; Zeis, R.
2017. Electrochimica acta, 257, 89–98. doi:10.1016/j.electacta.2017.10.054
The influence of polarity in binary solvent mixtures on the conformation of bis-triazinyl-pyridine in solution
Trumm, M.; Adam, C.; Koke, C.; Maiwald, M.; Höfener, S.; Skerencak-Frech, A.; Panak, P. J.; Schimmelpfennig, B.
2017. Molecular physics, 116 (4), 507–514. doi:10.1080/00268976.2017.1406163
Snowball Earth climate dynamics and Cryogenian geology-geobiology
Hoffman, P. F.; Abbot, D. S.; Ashkenazy, Y.; Benn, D. I.; Brocks, J. J.; Cohen, P. A.; Cox, G. M.; Creveling, J. R.; Donnadieu, Y.; Voigt, A.; et al.
2017. Science advances, 3 (11), Art.Nr. e1600983. doi:10.1126/sciadv.1600983
Dynamische Parameteranpassung bei der Mikrozerspanung von 20MnCr5
Gabsch, A.; Klotz, S.; Zanger, F.; Schulze, V.
2017. F. Vollertsen (Ed.), 8. Kolloquium Mikroproduktion : Fachbeiträge, Bremen, 27.-28. November 2017 / Hrsg.: F. Vollertsen, 149–154, Verlag BIAS
Präsentationen in der externen Wissenschaftskommunikation: Formen & Charakteristika
Schrögel, P.; Niemann, P.; Bittner, L.; Hauser, C.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000123447
Si- and Sn-containing SiOCN-based nanocomposites as anode materials for lithium ion batteries: synthesis, thermodynamic characterization and modeling
Rohrer, J.; Vrankovic, D.; Cupid, D.; Riedel, R.; Seifert, H. J.; Albe, K.; Graczyk-Zajac, M.
2017. International journal of materials research, 108 (11), 920–932. doi:10.3139/146.111517
Inductively shunted transmon qubit with tunable transverse and longitudinal coupling
Richer, S.; Maleeva, N.; Skacel, S. T.; Pop, I. M.; DiVincenzo, D.
2017. Physical review / B, 96 (17), Art.Nr. 174520. doi:10.1103/PhysRevB.96.174520
Phase diagram, thermodynamic investigations, and modelling of systems relevant to lithium-ion batteries
Fürtauer, S.; Li, D.; Henriques, D.; Beutl, A.; Giel, H.; Cupid, D.; Markus, T.; Flanorfer, H.
2017. International journal of materials research, 108 (11), 887–903. doi:10.3139/146.111561
Inner- and outer-wall sorting of double-walled carbon nanotubes
Li, H.; Gordeev, G.; Wasserroth, S.; Chakravadhanula, V. S. K.; Neelakandhan, S. K. C.; Hennrich, F.; Jorio, A.; Reich, S.; Krupke, R.; Flavel, B. S.
2017. Nature nanotechnology. doi:10.1038/nnano.2017.207
Preconditioned Krylov solvers on GPUs
Anzt, H.; Gates, M.; Dongarra, J.; Kreutzer, M.; Wellein, G.; Köhler, M.
2017. Parallel computing, 68 (October), 32–44. doi:10.1016/j.parco.2017.05.006
Cloaking of contact fingers on solar cells and OLEDs using free-form surfaces designed by coordinate transformations (Conference Presentation)
Schumann, M. F.; Langenhorst, M.; Smeets, M.; Ding, K.; Paetzold, U. W.; Fritz, B.; Eckstein, R.; Gomard, G.; Wegener, M.
2017. Metamaterials, Metadevices, and Metasystems 2017. Ed.: N. Engheta, Art. Nr. 1034314, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2272911
Enthalpies of formation of layered LiNiₓMnₓCo₁₋₂ₓO₂ (0 ≤ x ≤ 0.5) compounds as lithium ion battery cathode materials
Masoumi, M.; Cupid, D. M.; Reichmann, T. L.; Chang, K.; Music, D.; Schneider, J. M.; Seifert, H. J.
2017. International journal of materials research, 108 (11), 869–878. doi:10.3139/146.111553
Mechanical surface modification using cutting inserts
Segebade, E.; Klose, J.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. I. S. C. for Shot Peening (Ed.), ICSP13 : 13th International Conference on Shot Peening : 18-21 September 2017, Montréal, Canada / organizing institution: Polytechnique Montréal: Proceedings, 219–224, [Verlag nicht ermittelbar]
Simulative Betrachtung von Prozessketten in der Fertigung
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. massivUmformung, 2017, 56–59
Optical Analysis of Planar Multicrystalline Perovskite Solar Cells
Eerden, M. van; Jaysankar, M.; Hadipour, A.; Merckx, T.; Schermer, J. J.; Aernouts, T.; Poortmans, J.; Paetzold, U. W.
2017. Advanced optical materials, 5 (18), Art. Nr.: 1700151. doi:10.1002/adom.201700151
Self-Healing and Shape Memory Effects in Gold Microparticles through the Defects-Mediated Diffusion
Kovalenko, O.; Brandl, C.; Klinger, L.; Rabkin, E.
2017. Advanced science, 4 (8), Arrt.Nr. 1700159. doi:10.1002/advs.201700159
Combining frozen-density embedding with the conductor-like screening model using Lagrangian techniques for response properties
Schieschke, N.; Di Remigio, R.; Frediani, L.; Heuser, J.; Höfener, S.
2017. Journal of computational chemistry, 38 (19), 1693–1703. doi:10.1002/jcc.24813
Comparison of Modeling Methods to Determine Cutting Tool Profile for Conventional and Synchronized Whirling
Zanger, F.; Sellmeier, V.; Klose, J.; Bartkowiak, M.; Schulze, V.
2017. Procedia CIRP, 58, 222–227. doi:10.1016/j.procir.2017.03.216
Guiding Cell Attachment in 3D Microscaffolds Selectively Functionalized with Two Distinct Adhesion Proteins
Richter, B.; Hahn, V.; Bertels, S.; Claus, T. K.; Wegener, M.; Delaittre, G.; Barner-Kowollik, C.; Bastmeyer, M.
2017. Advanced materials, 29 (5), Art.Nr. 1604342. doi:10.1002/adma.201604342
Asymmetrische Schneidkantenmikrogeometrien - Bedeutung, Charakterisierung, potenzielle Anwendungen und Herausforderungen
Segebade, E.; Zanger, F.; Schulze, V.
2017. Spanende Fertigung. Hrsg.: Dirk Biermann, 79–86, Vulkan-Verlag
The 2017 KIT IWSLT Speech-to-Text Systems for English and German
Nguyen, T.-S.; Sperber, S.; Zenkel, T.; Stüker, S.; Müller, M.; Waibel, A.
2017. Proceedings of the 14th International Conference on Spoken Language Translation. Ed.: S. Sakti, M. Utiyama, 60–64, Association for Computational Linguistics (ACL)
Overview of the IWSLT 2017 Evaluation Campaign
Federmann, C.; Cettolo, M.; Bentivogli, L.; Niehues, J.; Stüker, S.; Sudoh, K.; Yoshino, K.; Federico, M.
2017. Proceedings of the 14th International Conference on Spoken Language Translation. Ed.: S. Sakti, M. Utiyama, 2–14, Association for Computational Linguistics (ACL)
Improving phoneme set discovery for documenting unwritten languages
Müller, M.; Stüker, S.; Waibel, A.; Franke, J.
2017. Elektronische Sprachsignalverarbeitung 2017: Tagungsband der 28. Konferenz, Saarbrücken, 15.-17. März 2017. Ed.: J. Trouvain, I. Steiner, B. Möbius, 202–209, TUDpress
Simulative Investigations on Different Friction Coefficient Models
Zanger, F.; Bollig, P.; Schulze, V.
2017. (Elsevier, Ed.) Procedia CIRP, 58, 140–145. doi:10.1016/j.procir.2017.03.203
Optimierung der Aktivlotzusammensetzung für Al2O3 und Herstellung von innenliegenden Leiterbahnen
Götze, E.; Heinzel, Y.; Matuschka, B.; Zanger, F.; Schulze, V.; Rohde, M.; Krügelstein, A.; Franke, J.
2017. F. Vollertsen (Ed.), 8. Kolloquium Mikroproduktion : Fachbeiträge, Bremen, 27.-28. November 2017 / Hrsg.: F. Vollertsen, 129–134, Verlag BIAS
Finish machining of laser beam melted parts
Götze, E.; Zanger, F.; Schulze, V.
2017. Proceedings of the Special Interest Group Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing : October 10-11, 2017, Leuven, BE. Ed.: W. Dewulf, 99–103, European Society for Precision Engineering and Nanotechnology (euspen)
Randschichtzustände nach Fertigungsprozessen ? Erzeugung und Bewertung
Schulze, V.; Zanger, F.; Bollig, P.; Segebade, E.; Gerstenmeyer, M.; Klotz, S.
2017. Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 3. Innovation Forum Zerspanungstechnolgie, 2019. Hrsg.: Bahman Azarhoushang, Hochschule Furtwangen
Zerspanungssimulation mit Simufact Forming
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. M. Wohlmuth & H. Schafstall (Eds.), 18. RoundTable Simulating Manufacturing : Tagungsband : 30. Mai-1. Juni 2017, Congresszentrum Marburg. Hrsg.: Michael Wohlmuth, Hendrik Schafstall, 116–127, Simufact Engineering GmbH
Simulation der mechanischen Oberflächenbehandlung mit Simufact Forming
Gerstenmeyer, M.; Segebade, E.; Zanger, F.; Schulze, V.
2017. M. Wohlmuth (Ed.), 18. RoundTable Simulating Manufacturing : Tagungsband : 30. Mai-1. Juni 2017, Marburg. Hrsg.: Hendrik Schafstall, 180–189, Simufact Engineering GmbH
Signifikant Leistungsfähiger - synchroner Drehwirbel-Prozess
Klotz, S.; Zanger, F.; Sellmeier, V.; Schulze, V.
2017. Werkstatt und Betrieb, 2016, 62–65
Overview of the IWSLT 2017 Evaluation Campaign
Cettolo, M.; Federico, M.; Bentivogli, L.; Niehues, J.; Stüker, S.; Sudoh, K.; Yoshino, K.; Federmann, C.
2017. Proceedings of the 14th International Workshop on Spoken Language Translation (IWSLT 2017), 2–14
Das interaktive Poster aus Sicht der Präsentierenden – Auswertung von Leitfadeninterviews
Hauser, C.; Jätzold, L.; Niemann, P.; Raabe, K.; Schrögel, P.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000122901
Generating Scaled Replicas of Real-World Complex Networks
Staudt, C. L.; Hamann, M.; Safro, I.; Gutfraind, A.; Meyerhenke, H.
2017. Complex Networks & Their Applications V : Proceedings of the 5th International Workshop on Complex Networks and their Applications (COMPLEX NETWORKS 2016). Ed.: H. Cherifi, 17–28, Springer. doi:10.1007/978-3-319-50901-3_2
An Iterative Approach for the Determination of Tailored Blanks for Waste-Free Composite Forming by Means of FE Forming Simulation
Dörr, D.; Lipowsky, L.; Schirmaier, F. J.; Kärger, L.; Henning, F.
2017. International journal of automotive composites, 3 (2-4, SI), 323–338. doi:10.1504/IJAUTOC.2017.091427
Automotive Systems Modelling with Vitruvius
Mazkatli, M.; Burger, E.; Koziolek, A.; Reussner, R. H.
2017. INFORMATIK 2017. Tagung, Chemnitz, 25.- 29. September 2017. Hrsg.: M. Eibl, 1487–1498, Gesellschaft für Informatik (GI). doi:10.18420/in2017_148
Reference Scenarios for Self-aware Computing
Kephart, J. O.; Maggio, M.; Diaconescu, A.; Giese, H.; Hoffmann, H.; Kounev, S.; Koziolek, A.; Lewis, P.; Robertsson, A.; Spinner, S.
2017. Self-Aware Computing Systems. Ed.: S. Kounev, 87–106, Springer International Publishing. doi:10.1007/978-3-319-47474-8_4
Considering Transient Effects of Self-Adaptations in Model-Driven Performance Analyses
Stier, C.; Koziolek, A.
2017. Software Engineering 2017: Fachtagung des GI-Fachbereichs Softwaretechnik (SE 2017), Hannover, 21.-24. Februar 2017. Hrsg.: J. Jürjens, 99–100, Gesellschaft für Informatik (GI)
Assessing Self-awareness
Esterle, L.; Bellman, K. L.; Becker, S.; Koziolek, A.; Landauer, C.; Lewis, P.
2017. Self-Aware Computing Systems. Ed.: S. Kounev, 465–481, Springer International Publishing. doi:10.1007/978-3-319-47474-8_15
A mechanism-based homogenization strategy for the determination of flow stress and strain hardening
Schulz, K.; Sudmanns, M.
2017. Proceedings in applied mathematics and mechanics, 17 (1), 107–110. doi:10.1002/pamm.201710031
TracyML - A Modeling Language for Social Impacts of Product Life Cycles
Betz, S.; Fritsch, A.; Oberweis, A.
2017. Forum and Demos at ER 2017. Proceedings of the ER Forum 2017 and the ER 2017 Demo Track co-located with the 36th International Conference on Conceptual Modelling (ER 2017), Valencia, Spain, November 6-9, 2017. Ed.: C. Cabanillas, S. España, S. Farshidi, 193–206, RWTH Aachen
Reinforcement Learning for Multi-Step Expert Advice
Philipp, P.; Rettinger, A.
2017. 16th International Conference on Autonomous Agents and Multiagent Systems, AAMAS 2017; Sao Paulo; Brazil; 8 May 2017 through 12 May 2017, 962–971, Curran
A three-dimensional damage model for transversely isotropic composites in the framework of finite strain
Naake, D.; Welschinger, F.; Kärger, L.; Henning, F.
2017. 21st International Conference on Composite Materials, ICCM 2017; Xi’an; China; 20 August 2017 through 25 August 2017, ICCM
The Giant Radio Array for Neutrino Detection (GRAND) : Present and perspectives
Fang, K.; Álvarez-Muñiz, J.; Batista, R. A.; Bustamante, M.; Carvalho, W.; Charrier, D.; Cognard, I.; De Jong, S.; De Vries, K. D.; Schröder, F.; et al.
2017. Proceedings of the 35th International Cosmic Ray Conference, ICRC 2017, Bexco, Busan, Korea, 10th - 20th July 2017, Scuola Internazionale Superiore di Studi Avanzati (SISSA)
The population point of view on the evolution of TeV pulsar wind nebulae
H.E.S.S. Collaboration; Klepser, S.; Gallant, Y. A.; Mayer, M.; Valerius, K.
2017. Proceedings of the 35th International Cosmic Ray Conference, ICRC 2017, Bexco, Busan, Korea, 10th - 20th July 2017, Scuola Internazionale Superiore di Studi Avanzati (SISSA)
Measurement of anisotropies in cosmic ray arrival directions with the Alpha Magnetic Spectrometer on the ISS
AMS Collaboration; Gebauer, I.; Bindel, F.; Graziani, M.; Zeissler, S.; Casaus, J.; Mana, C.; Velasco, M. A.; Gervasi, M.; La Vacca, G.; et al.
2017. Proceedings of the 35th International Cosmic Ray Conference, ICRC 2017, Bexco, Busan, Korea, 10th - 20th July 2017, Scuola Internazionale Superiore di Studi Avanzati (SISSA)
Molecular clouds as the origin of the Fermi gamma-ray GeV-excess
Gebauer, I.; Boer, W. de; Bosse, L.; Neumann, A.; Biermann, P. L.
2017. Proceedings of the 35th International Cosmic Ray Conference, ICRC 2017, Bexco, Busan, Korea, 10th - 20th July 2017, Scuola Internazionale Superiore di Studi Avanzati (SISSA)
Evaluation of Social Value Icons for a Domain-Specific Modeling Language
Fritsch, A.; Betz, S.
2017. Informatik 2017 : Chemnitz, Deutschland, 25.-29. September 2017. Hrsg.: M. Eibl, 2323–2328, Gesellschaft für Informatik (GI). doi:10.18420/in2017_234
Discussion of crack initiation in metal matrix composites
Sudmanns, M.; Schulz, K.
2017. Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Stuttgart, Germany, 11th - 13th October 2017. Ed.: M. von Scheven, 296–299, Institute for Structural Mechanics
Data-driven crack assessment
Schulz, K.; Verrier, V.; Kreis, S.
2017. Proceedings of the 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry, Stuttgart, Germany, 11th - 13th October 2017. Ed.: M. von Scheven, 292–295, Institute for Structural Mechanics
Variable-Size Batched Gauss-Huard for Block-Jacobi Preconditioning
Anzt, H.; Dongarra, J.; Flegar, G.; Quintana-Ortí, E. S.; Tomás, A. E.
2017. Procedia computer science, 108, 1783–1792. doi:10.1016/j.procs.2017.05.186
Flexible batched sparse matrix-vector product on GPUs
Anzt, H.; Collins, G.; Dongarra, J.; Flegar, G.; Quintana-Ortí, E. S.
2017. the 8th Workshop, Denver, Colorado, 12–17 November 2017, 1–8, Association for Computing Machinery (ACM). doi:10.1145/3148226.3148230
Scalable and low cost fabrication methods for wavelength tunable solution processed perovskite distributed feedback lasers
Brenner, P.; Mathies, F.; Kapp, D.; Paetzold, U.; Quintilla, A.; Hernandez-Sosa, G.; Howard, I.; Lemmer, U.
2017. Proceedings of the European Conference on Lasers and Electro-Optics 2017, Munich, Germany, 25th - 29th June 2017, Art.Nr. JSV_3_2, Optica Publishing Group (OSA)
Overcoming Load Imbalance for Irregular Sparse Matrices
Flegar, G.; Anzt, H.
2017. Proceedings of the 7th Workshop on Irregular Applications : Architectures and Algorithms, IA3’17, Denver, Colorado, USA, 12th - 17th November 2017, Art.Nr. 2, Association for Computing Machinery (ACM). doi:10.1145/3149704.3149767
Microstructural and hardness changes in aluminum alloy Al-7075 : Correlating machining and equal channel angular pressing
Imbrogno, S.; Umbrello, D.; Segebade, E.; Fellmeth, A.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26th - 28th April 2017, American Institute of Physics (AIP). doi:10.1063/1.5008112
Modeling of the Non-Isothermal Crystallization Kinetics of Polyamide 6 Composites During Thermoforming
Kugele, D.; Dörr, D.; Wittemann, F.; Hangs, B.; Rausch, J.; Kärger, L.; Henning, F.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26th - 28th April 2017, Art.Nr. 030005, American Institute of Physics (AIP). doi:10.1063/1.5007992
Modeling and validation of gripper induced membrane forces in finite element forming simulation of continuously reinforced composites
Poppe, C.; Dörr, D.; Kärger, L.; Henning, F.; Joppich, T.; Henning, F.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26–28 April 2017, Art.Nr. 030002, American Institute of Physics (AIP). doi:10.1063/1.5007989
On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics
Dörr, D.; Schirmaier, F. J.; Henning, F.; Kärger, L.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26th - 28th April 2017, Art.Nr. 030003, American Institute of Physics (AIP). doi:10.1063/1.5007990
Observation of the Identical Rigidity Dependence of He, C, and O Cosmic Rays at High Rigidities by the Alpha Magnetic Spectrometer on the International Space Station
AMS Collaboration; Aguilar, M.; Ali Cavasonza, L.; Alpat, B.; Ambrosi, G.; Arruda, L.; Attig, N.; Aupetit, S.; Azzarello, P.; Gebauer, I.; et al.
2017. Physical review letters, 119 (25), Art.Nr. 251101. doi:10.1103/PhysRevLett.119.251101
Resonant Anti-Stokes Raman Scattering in Single-walled Carbon Nanotubes
Gordeev, G.; Jorio, A.; Kusch, P.; Vieira, B. G. M.; Flavel, B.; Krupke, R.; Barros, E. B.; Reich, S.
2017. Physical review / B, 96 (24), Art.Nr. 245415. doi:10.1103/PhysRevB.96.245415
Enhancing backchannel prediction using word embeddings
Ruede, R.; Müller, M.; Stüker, S.; Waibel, A.
2017. Situated interaction : Interspeech 2017, Stockholm, Sweden, 20th - 24th August 2017. Ed.: F. Lacerda, 879–883, ISCA. doi:10.21437/Interspeech.2017-1606
Comparison of decoding strategies for CTC acoustic models
Zenkel, T.; Sanabria, R.; Metze, F.; Niehues, J.; Sperber, M.; Stüker, S.; Waibel, A.
2017. Situated interaction : Interspeech 2017, Stockholm, Sweden, 20th - 24th August 2017. Ed.: F. Lacerda, 513–517, ISCA. doi:10.21437/Interspeech.2017-1683
Automatic Evaluation of Complex Design Decisions in Component-based Software Architectures
Scheerer, M.; Busch, A.; Koziolek, A.
2017. MEMOCODE ’17 : Proceedings of the 15th ACM-IEEE International Conference on Formal Methods and Models for System Design, Vienna, Austria, 29th September - 2nd October 2017, 67–76, Association for Computing Machinery (ACM). doi:10.1145/3127041.3127059
Scalable perovskite/CIGS thin-film solar module with power conversion efficiency of 17.8%
Paetzold, U. W.; Jaysankar, M.; Gehlhaar, R.; Ahlswede, E.; Paetel, S.; Qiu, W.; Bastos, J.; Rakocevic, L.; Richards, B. S.; Aernouts, T.; et al.
2017. Journal of materials chemistry / A, 5 (20), 9897–9906. doi:10.1039/C7TA01651D
Performance of silicon solar cells with cloaked contact fingers under realistic conditions
Langenhorst, M.; Schumann, M. F.; Schmager, R.; Lehr, J.; Lemmer, U.; Wegener, M.; Richards, B.; Paetzold, U. W.
2017. Optical Nanostructures and Advanced Materials for Photovoltaics, Boulder, United States, 6th - 9th November 2017, Optica Publishing Group (OSA). doi:10.1364/PV.2017.PW2A.3
Thermodynamics of photon recycling in four terminal perovskite/Si tandem solar cells
Abebe, M. G.; Gomard, G.; Zschiedrich, L.; Rockstuhl, C.; Paetzold, U. W.; Abass, A.
2017. Optical Nanostructures and Advanced Materials for Photovoltaics, Boulder, United States, 6th - 9th November 2017, Optica Publishing Group (OSA). doi:10.1364/PV.2017.PM4A.2
Thermochemical stability of Li-Cu-O ternarycompounds stable at room temperature analyzed by experimental and theoretical methods
Lepple, M.; Rohrer, J.; Adam, R.; Cupid, D. M.; Rafaja, D.; Albe, K.; Seifert, H. J.
2017. International journal of materials research, 108 (11), 959–970. doi:10.3139/146.111560
Interlaboratory study of the heat capacity of LiNi1/3Mn1/3Co1/3O2 (NMC111) with layered structure
Cupid, D. M.; Gotcu, P.; Beutl, A.; Bergfeldt, T.; Giel, H.; Henriques, D.; Kozlov, A.; Masoumi, M.; Seidel, J.; Flandorfer, H.; et al.
2017. International journal of materials research, 108 (11), 1008–1021. doi:10.3139/146.111571
Coexistence of conversion and intercalation mechanisms in lithium ion batteries: Consequences for microstructure and interaction between the active material and electrolyte
Adam, R.; Lepple, M.; Mayer, N. A.; Cupid, D. M.; Qian, Y.; Niehoff, P.; Schappacher, F. M.; Wadewitz, D.; Balachandran, G.; Bhaskar, A.; et al.
2017. International journal of materials research, 108 (11), 971–983. doi:10.3139/146.111509
BreXearch : Exploring Brexit Data Using Cross-Lingual and Cross-Media Semantic Search
Zhang, L.; Acosta, M.; Färber, M.; Thoma, S.; Rettinger, A.
2017. ISWC-P&D-Industry 2017, ISWC 2017 Posters & Demonstrations and Industry Tracks, Proceedings of the ISWC 2017 Posters & Demonstrations and Industry Tracks co-located with 16th International Semantic Web Conference (ISWC 2017), Vienna, Austria, October 23rd to 25th, 2017. Ed.: N. Nikitina, RWTH Aachen
The rise of the working rich. The case of unified Germany
Haupt, A.; Nollmann, G.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000076852
Pt Immobilization within a Tailored Porous-Organic Polymer-Graphene Composite: Opportunities in the Hydrogen Evolving Reaction
Soliman, A. B.; Hassan, M. H.; Huan, T. N.; Abugable, A. A.; Elmehalmey, W. A.; Karakalos, S. G.; Tsotsalas, M.; Heinle, M.; Elbahri, M.; Fontecave, M.; et al.
2017. ACS catalysis, 7 (11), 7847–7854. doi:10.1021/acscatal.7b02246
Long-Term Stability of Polymer-Coated Surface Transverse Wave Sensors for the Detection of Organic Solvent Vapors
Stahl, U.; Voigt, A.; Dirschka, M.; Barié, N.; Richter, C.; Waldbaur, A.; Gruhl, F. J.; Rapp, B. E.; Rapp, M.; Länge, K.
2017. Sensors, 17 (11), Art.Nr. 2529. doi:10.3390/s17112529
Transparent, abrasion-insensitive superhydrophobic coatings for real-world applications
Helmer, D.; Keller, N.; Kotz, F.; Stolz, F.; Greiner, C.; Nargang, T. M.; Sachsenheimer, K.; Rapp, B. E.
2017. Scientific reports, 7, Art.Nr. 15078. doi:10.1038/s41598-017-15287-8
The Impacts of Microporous Layer Degradation on Liquid Water Distributions in Polymer Electrolyte Membrane Fuel Cells Using Synchrotron Imaging
Liu, H.; George, M. G.; Zeis, R.; Messerschmidt, M.; Scholta, J.; Bazylak, A.
2017. ECS transactions, 80 (8), 155–164. doi:10.1149/08008.0155ecst
Additive-Assisted Crystallization Dynamics in Two-Step Fabrication of Perovskite Solar Cells
Abzieher, T.; Mathies, F.; Hetterich, M.; Welle, A.; Gerthsen, D.; Lemmer, U.; Paetzold, U. W.; Powalla, M.
2017. Physica status solidi / A, 214 (12), Art.Nr. 1700509. doi:10.1002/pssa.201700509
Triple cation mixed-halide perovskites for tunable lasers
Brenner, P.; Glöckler, T.; Rueda-Delgado, D.; Abzieher, T.; Jakoby, M.; Richards, B. S.; Paetzold, U. W.; Howard, I. A.; Lemmer, U.
2017. Optical materials express, 7 (11), 4082–4094. doi:10.1364/OME.7.004082
Maxent-stress optimization of 3D biomolecular models
Wegner, M.; Taubert, O.; Schug, A.; Meyerhenke, H.
2017. 25th European Symposium on Algorithms, Vienna, A, 4.- 6. September 2017, Art.Nr.: 70, Schloss Dagstuhl - Leibniz-Zentrum für Informatik (LZI). doi:10.4230/LIPIcs.ESA.2017.70
Bio-instructive coatings for hematopoietic stem cell expansion based on chemical vapor deposition co-polymerization
Winkler, A.-L.; Koenig, M.; Welle, A.; Trouillet, V.; Domenic, K.; Christoph, H.; Lahann, J.; Lee-Thedieck, C.
2017. Biomacromolecules, 18 (10), 3089–3098. doi:10.1021/acs.biomac.7b00743
Significance of Nanopatterned and Clustered DLL1 for Hematopoietic Stem Cell Proliferation
Winkler, A.-L.; Wulffen, J. von; Rödling, L.; Raic, A.; Reinartz, I.; Schug, A.; Gralla-Koser, R.; Geckle, U.; Welle, A.; Lee-Thedieck, C.
2017. Advanced functional materials, 27 (21), Art.Nr. 1606495. doi:10.1002/adfm.201606495
Texture of the Viola Flower for Light Harvesting in Photovoltaics
Schmager, R.; Fritz, B.; Hünig, R.; Ding, K.; Lemmer, U.; Richards, B. S.; Gomard, G.; Paetzold, U. W.
2017. ACS photonics, 2687–2692. doi:10.1021/acsphotonics.7b01153
Analog quantum simulation of the Rabi model in the ultra-strong coupling regime
Braumüller, J.; Marthaler, M.; Schneider, A.; Stehli, A.; Rotzinger, H.; Weides, M.; Ustinov, A. V.
2017. Nature Communications, 8 (1), Art. Nr. 779. doi:10.1038/s41467-017-00894-w
Parallel Graph Partitioning for Complex Networks
Meyerhenke, H.; Sanders, P.; Schulz, C.
2017. IEEE transactions on parallel and distributed systems, 28 (9), 2625–2638. doi:10.1109/TPDS.2017.2671868
Excitonically Coupled States in Crystalline Coordination Networks
Haldar, R.; Mazel, A.; Joseph, R.; Adams, M.; Howard, I. A.; Richards, B. S.; Tsotsalas, M.; Redel, E.; Diring, S.; Odobel, F.; et al.
2017. Chemistry - a European journal, 23 (57), 14316–14322. doi:10.1002/chem.201702968
Molecular clouds as origin of the Fermi gamma-ray GeV excess
De Boer, W.; Bosse, L.; Gebauer, I.; Neumann, A.; Biermann, P. L.
2017. Physical review / D, 96 (4), Art.Nr.: 043012. doi:10.1103/PhysRevD.96.043012
Nitrilotriacetic Amine-Functionalized Polymeric Core-Shell Nanoparticles as Enzyme Immobilization Supports
Keller, D.; Beloqui, A.; Martínez-Martínez, M.; Ferrer, M.; Delaittre, G.
2017. Biomacromolecules, 18 (9), 2777–2788. doi:10.1021/acs.biomac.7b00677
Decoupled Associative and Dissociative Processes in Strong yet Highly Dynamic Host-Guest Complexes
Appel, E. A.; Biedermann, F.; Hoogland, D.; Barrio, J. del; Driscoll, M. D.; Hay, S.; Wales, D. J.; Scherman, O. A.
2017. Journal of the American Chemical Society, 139 (37), 12985–12993. doi:10.1021/jacs.7b04821
Understanding the graphitization and growth of free-standing nanocrystalline graphene using: In situ transmission electron microscopy
Kumar, C. N. S.; Chakravadhanula, V. S. K.; Riaz, A.; Dehm, S.; Wang, D.; Mu, X.; Flavel, B.; Krupke, R.; Kübel, C.
2017. Nanoscale, 9 (35), 12835–12842. doi:10.1039/c7nr03276e
Language adaptive multilingual CTC speech recognition
Müller, M.; Stüker, S.; Waibel, A.
2017. Speech and Computer: 19th International Conference, SPECOM 2017 Hatfield, UK, September 12–16, 2017, Proceedings. Ed.: A. Karpov, 473–482, Springer. doi:10.1007/978-3-319-66429-3_47
Deriving Power Models for Architecture-Level Energy Efficiency Analyses
Stier, C.; Werle, D.; Koziolek, A.
2017. Computer Performance Engineering : 14th European Workshop, EPEW 2017, Berlin, Germany, 7th - 8th September 2017. Ed.: P. Reinecke, 214–229, Springer International Publishing. doi:10.1007/978-3-319-66583-2_14
Cutting Simulations Using a Commercially Available 2D/3D FEM Software for Forming
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 73–78. doi:10.1016/j.procir.2017.03.195
Kinematic Hardening of AISI 5120 during Machining Operations
Fellmeth, A.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 58, 104–109. doi:10.1016/j.procir.2017.03.201
Faster Betweenness Centrality Updates in Evolving Networks
Bergamini, E.; Meyerhenke, H.; Ortmann, M.; Slobbe, A.
2017. 16th Symposium on Experimental Algorithms (SEA 2017) , London, United Kingdom, 21st - 23rd June 2017. Ed.: C. S. Iliopoulos, Art. Nr.: 23, Schloss Dagstuhl - Leibniz-Zentrum für Informatik (LZI). doi:10.4230/LIPIcs.SEA.2017.23
Virtual characterization and macroscopic material modeling of a carbon fiber-reinforced PA6 UD composite
Rösner, A. M.; Kärger, L.; Henning, F.
2017. Journal of composite materials, 51 (21), 3075–3086. doi:10.1177/0021998316681186
Simulation of the influence of embedded inserts on the rtm filling behavior considering local fiber structure
Seuffert, J.; Kärger, L.; Henning, F.
2017. 21st Symposium on Composites, 2017; Bremen; Germany; 5 July 2017 through 7 July 2017. Ed.: A. S. Herrmann, 681–688, Trans Tech Publications. doi:10.4028/www.scientific.net/KEM.742.681
Photocurrent spectroscopy of dye-sensitized carbon nanotubes
Alam, A.; Dehm, S.; Hennrich, F.; Zakharko, Y.; Graf, A.; Pfohl, M.; Hossain, I. M.; Kappes, M. M.; Zaumseil, J.; Flavel, B. S.; et al.
2017. Nanoscale, 9 (31), 11205–11213. doi:10.1039/c7nr04022a
Exploring the upper limit of single-walled carbon nanotube purity by multiple-cycle aqueous two-phase separation
Wei, L.; Flavel, B. S.; Li, W.; Krupke, R.; Chen, Y.
2017. Nanoscale, 9 (32), 11640–11646. doi:10.1039/c7nr03302h
Shared memory parallel subgraph enumeration
Kimmig, R.; Meyerhenke, H.; Strash, D.
2017. Proceedings- 31st IEEE International Parallel and Distributed Processing Symposium Workshops, IPDPSW 2017; Orlando; United States; 29 May 2017 through 2 June 2017, 519–529, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IPDPSW.2017.133
An argon ion beam milling process for native AlOₓ layers enabling coherent superconducting contacts
Grünhaupt, L.; Lüpke, U. von; Gusenkova, D.; Skacel, S. T.; Maleeva, N.; Schlör, S.; Bilmes, A.; Rotzinger, H.; Pop, I. M.; Weides, M.; et al.
2017. Applied physics letters, 111 (7), Art. Nr. 072601. doi:10.1063/1.4990491
Electromigration and the structure of metallic nanocontacts
Hoffmann-Vogel, R.
2017. Applied physics reviews, 4 (3), Art. Nr. 031302. doi:10.1063/1.4994691
A Benchmark Study of Finite Element Codes for Forming Simulation of Thermoplastic UD-Tapes
Dörr, D.; Brymerski, W.; Ropers, S.; Leutz, D.; Joppich, T.; Kärger, L.; Henning, F.
2017. Procedia CIRP, 66, 101–106. doi:10.1016/j.procir.2017.03.223
Machinability of Continuous-Discontinuous Long Fiber Reinforced Polymer Structures
Helfrich, A.; Klotz, S.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 66, 193–198. doi:10.1016/j.procir.2017.03.366
On finding convex cuts in general, bipartite and plane graphs
Glantz, R.; Meyerhenke, H.
2017. Theoretical computer science, 695, 54–73. doi:10.1016/j.tcs.2017.07.026
Suspended Liquid Subtractive Lithography: One-step generation of 3D channel geometries in viscous curable polymer matrices
Helmer, D.; Voigt, A.; Wagner, S.; Keller, N.; Sachsenheimer, K.; Kotz, F.; Nargang, T. M.; Rapp, B. E.
2017. Scientific reports, 7, Art.Nr. 7387. doi:10.1038/s41598-017-07630-w
Broadening of Light Coupling to Waveguide Modes in Solar Cells by Disordered Grating Texturess
Bittkau, K.; Hoffmann, A.; Paetzold, U. W.; Carius, R.
2017. Applied Sciences, 7 (7), Art. Nr. 725. doi:10.3390/app7070725
Characterising sustainability requirements : A new species red herring or just an odd fish?
Venters, C. C.; Seyff, N.; Becker, C.; Betz, S.; Chitchyan, R.; Duboc, L.; Mcintyre, D.; Penzenstadler, B.
2017. ICSE-SEIS 2017 : IEEE/ACM 39th International Conference on Software Engineering : Software Engineering in Society Track, Buenos Aires, Argentina, 20th - 28th May 2017, 3–12, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICSE-SEIS.2017.2
Localized Conversion of Metal-Organic Frameworks into Polymer Gels via Light-Induced Click Chemistry
Schmitt, S.; Diring, S.; Weidler, P. G.; Begum, S.; Heißler, S.; Kitagawa, S.; Wöll, C.; Furukawa, S.; Tsotsalas, M.
2017. Chemistry of materials, 29 (14), 5982–5989. doi:10.1021/acs.chemmater.7b01677
Atomically resolved scanning force studies of vicinal Si(111)
Pérez León, C.; Drees, H.; Wippermann, S. M.; Marz, M.; Hoffmann-Vogel, R.
2017. Physical review / B, 95 (24), Art. Nr. 245412. doi:10.1103/PhysRevB.95.245412
Atomic discreteness and the nature of structural equilibrium in conductance histograms of electromigrated Cu nanocontacts
Pfender-Siedle, R.; Hauser, J.; Hoffmann-Vogel, R.
2017. Physical review / B, 95 (23), Art. Nr. 235418. doi:10.1103/PhysRevB.95.235418
Towards phoneme inventory discovery for documentation of unwritten languages
Müller, M.; Franke, J.; Waibel, A.; Stueker, S.
2017. ICASSP 2017 : IEEE International Conference on Acoustics, Speech and Signal Processing, New Orleans, USA, 5th - 9th March 2017, 5200–5204, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICASSP.2017.7953148
Polymer Structures on Surface Acoustic Wave Biosensors
Ritter, F.; Hedrich, J.; Deck, M.; Ludwig, F.; Shakirov, D.; Rapp, B. E.; Länge, K.
2017. Procedia Technology, 27, 35–36. doi:10.1016/j.protcy.2017.04.017
Stepwise Light-Induced Dual Compaction of Single-Chain Nanoparticles
Claus, T. K.; Zhang, J.; Martin, L.; Hartlieb, M.; Mutlu, H.; Perrier, S.; Delaittre, G.; Barner-Kowollik, C.
2017. Macromolecular rapid communications, 38 (16), Art. Nr.: 1700264. doi:10.1002/marc.201700264
Some say digitalization : Others say IT-enabled process management thought through to the end
Lederer, M.; Betz, S.; Kurz, M.; Schmidt, W.
2017. S-BPM ONE ’17 : Proceedings of the 9th Conference on Subject-oriented Business Process Management, Darmstadt, Germany, 30th - 31th March 2017. Ed.: M. Mühlhäuser, Art. Nr. 9, Association for Computing Machinery (ACM). doi:10.1145/3040565.3040574
Statistical sensitivity on right-handed currents in presence of eV scale sterile neutrinos with KATRIN
Steinbrink, N. M. N.; Glück, F.; Heizmann, F.; Kleesiek, M.; Valerius, K.; Weinheimer, C.; Hannestad, S.
2017. Journal of cosmology and astroparticle physics, 2017 (6), Art.Nr.: 015. doi:10.1088/1475-7516/2017/06/015
Near-equilibrium measurement of quantum size effects using Kelvin probe force microscopy
Späth, T.; Popp, M.; León, C. P.; Marz, M.; Hoffmann-Vogel, R.
2017. Nanoscale, 9 (23), 7868–7874. doi:10.1039/c7nr01874f
A semantic framework for sequential decision making for journal of web engineering
Philipp, P.; Maleshkova, M.; Rettinger, A.; Katic, D.
2017. Journal of Web Engineering, 16 (5-6), 471–504
Evaluation of the physical mechanisms of adhesively bonded metal-based hybrid material systems under tensile loading
Hummelberger, D.; Kärger, L.; Weidenmann, K. A.; Staeves, J.; Henning, F.
2017. Materials and design, 132, 215–224. doi:10.1016/j.matdes.2017.07.001
3D models of the hematopoietic stem cell niche under steady-state and active conditions
Rödling, L.; Schwedhelm, I.; Kraus, S.; Bieback, K.; Hansmann, J.; Lee-Thedieck, C.
2017. Scientific reports, 7, Art.Nr. 4625. doi:10.1038/s41598-017-04808-0
Thermal evolution of polar nanoregions identified by the relaxation time of electric modulus in the BiNaTiO system
Liu, L.; Ma, X.; Knapp, M.; Ehrenberg, H.; Peng, B.; Fang, L.; Hinterstein, M.
2017. epl, 118 (4), Art. Nr. 47001. doi:10.1209/0295-5075/118/47001
All-Angle Invisibility Cloaking of Contact Fingers on Solar Cells by Refractive Free-Form Surfaces
Schumann, M. F.; Langenhorst, M.; Smeets, M.; Ding, K.; Paetzold, U. W.; Wegener, M.
2017. Advanced optical materials, 5 (17), Art. Nr. 1700164. doi:10.1002/adom.201700164
Analytical and numerical techniques for solving Poiseuille flow problems in microfluides. habilitation thesis
Rapp, B. E.
2017. Karlsruher Institut für Technologie (KIT)
An Analytical Solution to Neumann-Type Mixed Boundary Poiseuille Microfluidic Flow in Rectangular Channel Cross-Sections (Slip/No-Slip) including a Numerical Technique to Derive It
Richter, C.; Kotz, F.; Keller, N.; Nargang, T. M.; Sachsenheimer, K.; Helmer, D.; Rapp, B. E.
2017. Journal of biomedical science and engineering, 10 (05), 205–218. doi:10.4236/jbise.2017.105016
3D Laser Micro- and Nano-Printing: Challenges for Chemistry
Barner-Kowollik, C.; Bastmeyer, M.; Blasco, E.; Delaittre, G.; Müller, P.; Richter, B.; Wegener, M.
2017. Angewandte Chemie, 129 (50), 16038–16056. doi:10.1002/ange.201704695
The xLiMe system : Cross-lingual and cross-modal semantic annotation, search and recommendation over live-TV, news and social media streams
Zhang, L.; Thalhammer, A.; Rettinger, A.; Färber, M.; Mogadala, A.; Denaux, R.
2017. Web semantics, 46-47, 20–30. doi:10.1016/j.websem.2017.03.002
Unveiling the Ion Conduction Mechanism in Imidazolium-Based Poly(ionic liquids) : A Comprehensive Investigation of the Structure-to-Transport Interplay
Delhorbe, V.; Bresser, D.; Mendil-Jakani, H.; Rannou, P.; Bernard, L.; Gutel, T.; Lyonnard, S.; Picard, L.
2017. Macromolecules, 50 (11), 4309–4321. doi:10.1021/acs.macromol.7b00197
A pulsed, mono-energetic and angular-selective UV photo-electron source for the commissioning of the KATRIN experiment
Behrens, J.; Ranitzsch, P. C.-O.; Beck, M.; Erhard, M.; Groh, S.; Kraus, M.; Hannen, V.; Ortjohann, H.-W.; Rest, O.; Valerius, K.; et al.
2017. The European physical journal / C, 77 (6), Art. Nr.: 410. doi:10.1140/epjc/s10052-017-4972-9
Low-cost electrodes for stable perovskite solar cells
Bastos, J. P.; Manghooli, S.; Jaysankar, M.; Tait, J. G.; Qiu, W.; Gehlhaar, R.; De Volder, M.; Uytterhoeven, G.; Poortmans, J.; Paetzold, U. W.
2017. Applied physics letters, 110 (23), Art. Nr. 233902. doi:10.1063/1.4984284
Nonlinear mechanical behaviour of Ba0.5Sr0.5Co0.8Fe0.2O3 − δ and in situ stress dependent synchrotron X-ray diffraction study
Geiger, P. T.; Clemens, O.; Khansur, N. H.; Hinterstein, M.; Sahini, M. G.; Grande, T.; Tung, P.; Daniels, J. E.; Webber, K. G.
2017. Solid state ionics, 300, 106–113. doi:10.1016/j.ssi.2016.11.027
Electric-Field-Induced Phase Transition in Mn-Doped (K0.48Na0.48Li0.04)NbO3 Lead-Free Ceramics
Mgbemere, H. E.; Schneider, G. A.; Schmitt, L.; Hinterstein, M.
2017. Journal of ceramic science and technology, 8 (1), 45–52. doi:10.4416/JCST2016-00074
The Five Phases to Standard Tritium Operation of KATRIN
KATRIN Collaboration; Bornschein, B.; Besserer, U.; Steidl, M.; Sturm, M.; Valerius, K.; Wendel, J.
2017. Fusion science and technology, 71 (3), 231–235. doi:10.1080/15361055.2016.1273703
Accelerated degradation of polymer electrolyte membrane fuel cell gas diffusion layers. III. Mass transport resistance and liquid water accumulation at limiting current density with in operando synchrotron X-ray radiography
George, M. G.; Liu, H.; Muirhead, D.; Banerjee, R.; Ge, N.; Shrestha, P.; Lee, J.; Chevalier, S.; Hinebaugh, J.; Zeis, R.; et al.
2017. Journal of the Electrochemical Society, 164 (7), F714-F721. doi:10.1149/2.0091707jes
Accelerated Degradation of Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers : II. Steady State Liquid Water Distributions with in Operando Synchrotron X-ray Radiography
Liu, H.; George, M. G.; Banerjee, R.; Ge, N.; Lee, J.; Muirhead, D.; Shrestha, P.; Chevalier, S.; Hinebaugh, J.; Zeis, R.; et al.
2017. Journal of the Electrochemical Society, 164 (7), F704-F713. doi:10.1149/2.0081707jes
Accelerated Degradation of Polymer Electrolyte Membrane Fuel Cell Gas Diffusion Layers : I. Methodology and Surface Characterization
Liu, H.; George, M. G.; Messerschmidt, M.; Zeis, R.; Kramer, D.; Scholta, J.; Bazylak, A.
2017. Journal of the Electrochemical Society, 164 (7), F695-F703. doi:10.1149/2.0071707jes
Integrating sustainability aspects in business process management
Larsch, S.; Betz, S.; Duboc, L.; Magdaleno, A. M.; Bomfim, C.
2017. Business Process Management Workshops : BPM 2016 International Workshops, Revised Papers, Rio de Janeiro, Brazil, 19th September 2016. Ed.: M. Dumas, 403–415, Springer. doi:10.1007/978-3-319-58457-7_29
How to incorporate sustainability into business process management lifecycle?
Magdaleno, A. M.; Duboc, L.; Betz, S.
2017. Business Process Management Workshops : BPM 2016 International Workshops, Rio de Janeiro, Brazil, Revised Papers, 19th September 2016. Ed.: M. Dumas, 440–443, Springer. doi:10.1007/978-3-319-58457-7_32
Fast and cheap fabrication of molding tools for polymer replication
Richter, C.; Kirschner, N.; Worgull, M.; Rapp, B. E.
2017. Microfluidics, BioMEMS, and Medical Microsystems XV, San Francisco, California, United States, 28th January 2017. Ed.: B. L. Gray, Art.Nr. 100610D, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2249831
Rapid structuring of proteins on filter paper using lithography
Nargang, T. M.; Kotz, F.; Keller, N.; Helmer, D.; Rapp, B. E.
2017. Microfluidics, BioMEMS, and Medical Microsystems XV, San Francisco, California, United States, 28th January 2017. Ed.: B. L. Gray, Society of Photo-optical Instrumentation Engineers (SPIE). doi:10.1117/12.2252116
ICPE 2017 Program Chairs’ Welcome
Koziolek, A.; Smirni, E.; Poess, M.
2017. ICPE’17, Proceedings of the 8th ACM/SPEC on International Conference on Performance Engineering, L’Aquila, Italy, 22-26 April 2017, III-IV, Association for Computing Machinery (ACM)
Identification of an optimal cutting edge microgeometry for Complementary Machining
Zanger, F.; Gerstenmeyer, M.; Weule, H.
2017. CIRP annals, manufacturing technology, 66 (1), 81–84. doi:10.1016/j.cirp.2017.04.026
Observation of a collective mode of an array of transmon qubits
Shulga, K. V.; Yang, P.; Fedorov, G. P.; Fistul, M. V.; Weides, M.; Ustinov, A. V.
2017. JETP letters, 105 (1), 47–50. doi:10.1134/S0021364017010143
Controlled electromigration of thin Pb films started from the normal and from the superconducting state
Staudt, D.; Hoffmann-Vogel, R.
2017. Journal of physics / D, 50 (18), Art. Nr.: 185301. doi:10.1088/1361-6463/aa67c6
Scaling up Group Closeness Maximization
Bergamini, E.; Gonser, T.; Meyerhenke, H.
2017. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000069278
Infiltrated photonic crystals for light-trapping in CuInSe₂ nanocrystal-based solar cells
Dottermusch, S.; Quintilla, A.; Gomard, G.; Roslizar, A.; Voggu, V. R.; Simonsen, B. A.; Park, J. S.; Pernik, D. R.; Korgel, B. A.; Paetzold, U. W.; et al.
2017. Optics express, 25 (12), A502-A514. doi:10.1364/OE.25.00A502
Four-Terminal Perovskite/Silicon Multijunction Solar Modules
Jaysankar, M.; Qiu, W.; Eerden, M. van; Aernouts, T.; Gehlhaar, R.; Debucquoy, M.; Paetzold, U. W.; Poortmans, J.
2017. Advanced energy materials, 7 (15), Art. Nr. 1602807. doi:10.1002/aenm.201602807
Standard enthalpy of reaction for the reduction of Co₃O₄ to CoO
Mayer, N. A.; Cupid, D. M.; Adam, R.; Reif, A.; Rafaja, D.; Seifert, H. J.
2017. Thermochimica acta, 652, 109–118. doi:10.1016/j.tca.2017.03.011
Three-dimensional printing of transparent fused silica glass
Kotz, F.; Arnold, K.; Bauer, W.; Schild, D.; Keller, N.; Sachsenheimer, K.; Nargang, T. M.; Richter, C.; Helmer, D.; Rapp, B. E.
2017. Nature <London>, 544 (7650), 337–339. doi:10.1038/nature22061
Interplay between structure and properties in acid-base blend PBI-based membranes for HT-PEM fuel cells
Giffin, G. A.; Galbiati, S.; Walter, M.; Aniol, K.; Ellwein, C.; Kerres, J.; Zeis, R.
2017. Journal of membrane science, 535, 122–131. doi:10.1016/j.memsci.2017.04.019
Challenges in QCD matter physics –The scientific programme of the Compressed Baryonic Matter experiment at FAIR
Ablyazimov, T.; Abuhoza, A.; Adak, R. P.; Adamczyk, M.; Agarwal, K.; Aggarwal, M. M.; Ahammed, Z.; Ahmad, F.; Ahmad, N.; Pop, A.; et al.
2017. The European physical journal / A, 53 (3), 60. doi:10.1140/epja/i2017-12248-y
Functional microporous polymers through Cu-mediated, free-radical polymerization of buckminster [60] fullerene
Haikal, R. R.; Soliman, A. B.; Pellechia, P. J.; Heißler, S.; Tsotsalas, M.; Ali, S. S.; Alkordi, M. H.
2017. Carbon, 118, 215–224. doi:10.1016/j.carbon.2017.03.043
Fitting Single-Walled Carbon Nanotube Optical Spectra
Pfohl, M.; Tune, D. D.; Graf, A.; Zaumseil, J.; Krupke, R.; Flavel, B. S.
2017. ACS omega, 2 (3), 1163–1171. doi:10.1021/acsomega.6b00468
Fast and efficient synthesis of microporous polymer nanomembranes via light-induced click reaction
An, Q.; Hassan, Y.; Yan, X.; Krolla-Sidenstein, P.; Mohammed, T.; Lang, M.; Bräse, S.; Tsotsalas, M.
2017. Beilstein journal of organic chemistry, 13, 558–563. doi:10.3762/bjoc.13.54
Linking Tweets with Monolingual and Cross-Lingual News using Transformed Word Embeddings
Mogadala, A.; Jung, D.; Rettinger, A.
2017. 18th International Conference on Computational Linguistics and Intelligent Text Processing (CICLing), Budapest, Hungary, April 17 - 23, 2017, arXiv:1710.09137
A white paper on keV sterile neutrino dark matter
Adhikari, R.; Agostini, M.; Anh Ky, N.; Araki, T.; Archidiacono, M.; Bahr, M.; Baur, J.; Behrens, J.; Bezrukov, F.; Valerius, K.; et al.
2017. Journal of cosmology and astroparticle physics, 2017 (1), Art. Nr.: 025. doi:10.1088/1475-7516/2017/01/025
Distribution of Relaxation Times Analysis of High-Temperature PEM Fuel Cell Impedance Spectra
Weiß, A.; Schindler, S.; Galbiati, S.; Danzer, M. A.; Zeis, R.
2017. Electrochimica acta, 230, 391–398. doi:10.1016/j.electacta.2017.02.011
New insights into pulsar wind nebula evolution with H.E.S.S. i and II
Klepser, S.; Aharonian, F.; Angüner, E. O.; Casanova, S.; Hahn, J.; Mariaud, C.; Mayer, M.; Mitchell, A.; Oya, I.; Valerius, K.; et al.
2017. High Energy Gamma-Ray Astronomy : 6th International Meeting on High Energy Gamma-Ray Astronomy. Heidelberg, July 11-15, 2016. Ed.: F.A. Aharonian, 040012, American Institute of Physics (AIP). doi:10.1063/1.4968916
The Li-Sb phase diagram part II: Calorimetry and thermodynamic assessment
Li, D.; Beutl, A.; Flandorfer, H.; Cupid, D. M.
2017. Journal of alloys and compounds, 701, 186–199. doi:10.1016/j.jallcom.2016.12.399
The Li-Sb phase diagram part I: New experimental results
Beutl, A.; Cupid, D.; Flandorfer, H.
2017. Journal of alloys and compounds, 695, 1052–1060. doi:10.1016/j.jallcom.2016.10.230
The para-fluoro-thiol ligation in water
Turgut, H.; Schmidt, A. C.; Wadhwani, P.; Welle, A.; Müller, R.; Delaittre, G.
2017. Polymer chemistry, 8 (8), 1288–1293. doi:10.1039/C6PY02108E
Light-driven reversible surface functionalization with anthracenes : visible light writing and mild UV erasing
Claus, T. K.; Telitel, S.; Welle, A.; Bastmeyer, M.; Vogt, A. P.; Delaittre, G.; Barner-Kowollik, C.
2017. Chemical communications, 53 (10), 1599–1602. doi:10.1039/C6CC09897E
Analysis of parasitic losses due to intermediate reflectors in silicon tandem solar cells
Hoffmann, A.; Lambertz, A.; Haas, S.; Merzhanova, T.; Paetzold, U. W.; Meier, M.; Bittkau, K.
2017. Solar energy materials & solar cells, 163 (Apr.), 185–190. doi:10.1016/j.solmat.2017.01.010
Deconvolution of the energy loss function of the KATRIN experiment
Hannen, V.; Heese, I.; Weinheimer, C.; Sejersen Riis, A.; Valerius, K.
2017. Astroparticle physics, 89, 30–38. doi:10.1016/j.astropartphys.2017.01.010
Aluminium-oxide wires for superconducting high kinetic inductance circuits
Rotzinger, H.; Skacel, S. T.; Pfirrmann, M.; Voss, J. N.; Münzberg, J.; Probst, S.; Bushev, P.; Weides, M. P.; Ustinov, A. V.; Mooij, J. E.
2017. Superconductor science and technology, 30 (2), 025002. doi:10.1088/0953-2048/30/2/025002
Structure and local charging of electromigrated Au nanocontacts
Arnold, D.; Marz, M.; Schneider, S.; Hoffmann-Vogel, R.
2017. Nanotechnology, 28 (5), Art. Nr.: 055206. doi:10.1088/1361-6528/28/5/055206
Platinum Complex Assemblies as Luminescent Probes and Tags for Drugs and Toxins in Water
Sinn, S.; Biedermann, F.; De Cola, L.
2017. Chemistry - a European journal, 23 (8), 1965–1971. doi:10.1002/chem.201605169
Iron-Doped ZnO for Lithium-Ion Anodes: Impact of the Dopant Ratio and Carbon Coating Content
Mueller, F.; Gutsche, A.; Nirschl, H.; Geiger, D.; Kaiser, U.; Bresser, D.; Passerini, S.
2017. Journal of the Electrochemical Society, 164 (1), A6123–A6130. doi:10.1149/2.0171701jes